X600 Reverse Circulation Drill Rig

X600 Reverse Circulation Drill Rig
X600 Reverse Circulation Drill Rig
X600 Reverse Circulation Drill Rig
X600 Reverse Circulation Drill Rig


Description

This feature packed RC Rig comes with a 950+ horsepower motor, a 1350cfm/500psi Air Compressor, a rod bin holding over 400mtrs of Rods and a 1,100ltr + fuel tank, a complete on board Sampling and Dust Suppression System as well as a Sandvik Rod Loader. This is almost a one stop Drilling operation. As usual we have a strong focus on safety, operating ergonomics and serviceability. If RC work is what you’re after then this big Rig is definitely worthy of consideration. Customised variations for this model are an additional option we offer.

Mast

  • AustEx heavy duty double lattice mast structure.
  • Heavy-duty dump plate with twin hydraulic cylinders providing 2.4 metre dump stroke.
  • Twin hydraulic mast raise cylinders.
  • Dual feed cylinders 5.5” bore x 2.75” rod x 4m stroke actuating 2:1 ratio travelling sheave system providing 8 metres of rotation head stroke.
  • Rapid head traverse speed (Retract 938mm per/sec)
  • Variable pull-back and pull-down micro fine feed control system.
  • 38,500 kg pull-back capacity with dual heavy duty Super 180 chains.
  • 16,000 kg pull down with dual heavy duty super 160 chains.
  • 600m survey with static brake and counter balance valve.
  • SWL 250 kg RC boom with hydraulic winch and static brake.
  • Hydraulic boom slew and lift.

Rotation Head

  • Heavy duty Air Drill RC head
  • Dual rotation motors providing 14,000Nm of rotation toque. 
  • 0 to 120rpm speed range.
  • AustEx heavy duty head plate with adjustable nylon head slides.

Cooler

  • V pack cooler rated to 55 degrees ambient 
  • F12-110 fan motor for low cooler pressure
  • Fuel cooler

Base

  • Design to suit crawler track frame or truck fitment.
  • Hydraulic stabilising jack legs fitted with counter balance valves.
  • Heavy duty A-frame and mast raise cylinder anchor points.
  • Australian standard safety access ladders and handrails fitted.
  • Hydraulic walkways.

Power Unit

  • Detroit Diesel MTU 12V-2000 series 850bhp @ 1800rpm
  • CAT C27 12V series 950bhp @ 1800 rpm
  • Cummins QSK 23  950bhp @ 1800 rpm

Compressor Unit

  • Sullair Compressor 1350cfm/350psi or 1150cfm/500psi

Control Cabinet

  • Pressed steel drillers control console with hinged opening doors on both sides.
  • 2 spool Rexroth directional control valve bank:
    • Section 1 - Rotation
    • Section 2 – Fast Feed
  • 7 spool directional control valve bank # 1:
    • Section 1 – Left Hand Rear Jack Leg
    • Section 2 - Right Hand Rear Jack Leg
    • Section 3 - Left Hand Front Jack Leg
    • Section 4 - Right Hand Front Jack Leg
    • Section 5 – Mast Raise
    • Section 6 – Mast Dump
    • Section 7 - Spare
  • 9 spool directional control valve bank # 2:
    • Section 1 – Fine Feed
    • Section 2 – Blow down
    • Section 3 – Slips table
    • Section 4 – Spare
    • Section 5 – Cabinet Raise lower
    • Section 6 – Cabinet swing
    • Section 7 – Cabinet slew
    • Section 8 - Spare
    • Section 9 – Air valve
  • 9 spool directional control valve bank # 3:
    • Section 1 – Break out in/out
    • Section 2 – Break out operate
    • Section 3 – Breakout cylinder
    • Section 4 – Rod handler slew
    • Section 5 – Survey winch
    • Section 6 – RC winch
    • Section 7 – RC boom slew
    • Section 8 – RC boom lift
    • Section 9 – Duster fan
  • Infinitely variable fine feed flow control valve.
  • Infinitely variable pull down pressure control.
  • Infinitely variable hold back pressure control..
  • Gauges:

All items on control console fascia labeled.

Miscellaneous

  • Double element filtration for engine.
  • 950 litre capacity hydraulic oil tank with level sight glass and dual return & case drain filtration.
  • Hydraulic pressure filtration.
  • CAT piston water pump.
    • 24 volt electrical system including heavy-duty battery box and emergency stop buttons.
  • Safety guarding to moving components.
  • Fold up driller’s platform.
    • All fabricated components sand-blasted prior to painting. All components primed and top coated with high quality 2-pack urethane paint in the customers colour of choice.

Operational Options

  • Rod handler and rod bin can be fitted.
  • On board booster
  • On board sampling system
  • On board duster unit with fan
  • Bit holders and tool boxes
  • Truck to tray fitmentFire suppression system